Made - Shantui Construction Machinery Co. Ltd.

Description - Germany STIEBEL transfer case, with a large powerful transmission for smooth and reliable work.

Product detail -

Overall Weight: 39000kg Max.

Travel Speed: 89km/h

Chassis: ISUZU CYH51Y

Length X Width X Height: 12807 X 2490 X 3971mm

Features -

Power system - Germany STIEBEL transfer case, with a large powerful transmission for smooth and reliable work.

Hydraulic system - The hydraulic system uses a dual-pump, dual-circuit, constant-power, open hydraulic system, with fuel pumps produced by Rexroth of Germany. The main cylinder and swing cylinder are driven by separate pumps, and the swing cylinder acts quickly and powerfully.

Pumping system - The intelligently designed mixing vane can automatically reverse in case of blockage then restore to its original cycle. Concrete feeder can hold up to 800L of concrete, and has an arc-shaped inner wall to ensure no material accumulation. Highly wear-resistant glass plates and cutting rings extend the service life. The "S" shaped piping has a small height differential, which enables the concrete to flow more smoothly. It is directly driven by hydraulic motors, featuring a simple drive structure and increasing convenience.

Boom and rig system - The structural parts of the boom and rig system are all made of DOMEX high-strength steel plates from Sweden's SSAB company, featuring high strength, light weight, and a high anti-fatigue capability. The boom balance valve is produced by Rexroth of Germany, and features overload damping protection, which can effectively avoid failure of the hydraulic system due to too much pressure, which can lead to damage of structural parts. The rotating stage can turn 270, covering a large work area. The rigs are a traditional rear swing type, which can spread out quickly, and are simple and reliable to use.

Rotational support system - The rotational support system adopts a rotational decelerator from Italy's COMER, Brevini and Laleonessa, and a rotational support from France's Rollix, providing smooth operation.

Centralised lubrication system - The "S" valve and concrete pumping cylinders have centralised lubrication. The hydraulically controlled grease pump ensures good lubrication and low grease consumption. All the lubrication points of the PRG grease distribution device have corresponding block indicators for convenience of inspection and service. When one grease point becomes blocked, other points will continue to work normally.

Automatic concrete piston withdrawal - With the press of a button, the concrete piston will immediately return to the water tank, making it more convenient and fast to check and repair the concrete piston.

Operation control system - The operation modes include: Electric counter panel operation Wireless remote control Emergency manual operation.